Can Condor Mini duplicate key from smart fortwo 3 button?

Have Smart fortwo 2003 with the button remote key. how do we cut this one? I have Condor XC mini and Condor Dolphin if that helps.

Smart 450 uses YM23.
Condor can make these 100%.
Also hu100r works fine.

Never by code.
If you measure up the cuts, you could select a similar keytype.
Or possible cut a depth of 1 on two positions.
The update tool allows you to create your own custom key files

I assume that your Condor mini can do the same as my master 007.

I have created a YM23 with 8 cuts. I placed it in the mercedes key folder.
Not sure that we can exchange theys files, but let us try.

Could someone load this custom KeyData.u file in there Condor.
Mini and or master.
Place the KeyData.u file in your condor file that contains: Condor 007 update software V1.0.5
Then open the CustomKeyTools,
Connect your pc with your condor using usb, and press synchronize.

Credits to @ rob h (dk member)

www.vvdishop.com

FAQ Condor Mini Plus Instacode + CustomKey Tools

Question 1: if you have an update for Instacode Live for the Condor XC-Mini Plus.  I already pay for Instacode and when I try to add my machine to my preferred cutting machine, it only has Condor Mini Bluetooth connection.

Question 2: After opening “CustomKey Tools”, I notice these options are under development, will you update in the near future?

vvdishop.com engineer reply:

1. In fact, Condor MINI plus Bluetooth communication port same as Condor XC-MINI, so if you activation authorization from instacode live, you can connect the machine to APP directly.

2. For Xhorse customize key data software, same you can use KM03 software, after you make the new profile of customize keys, you can connect machine to PC, then run sync data function. (after sync you can find customize data from cut by bitting)

Enjoy!

http://blog.vvdishop.com/question-on-condor-mini-plus-instacode-customkey-tools/

How to Cut Fiat Doblo SIP22 Key with Xhorse Dolphin XP005?

How -to: Decode and Cut SIP22 (FIAT DOBLO) Key with Xhorse Dolphin XP-005 key cutting machine.

Open Xhorse app and pair Dolphin XP005 via Bluetooth

Select Vehicle database function->Fiat->Doblo

Align M2 clamp

Decode Key

Decode key success

Start to duplicate new key

Left: new key    Right: original key

Press “Cutting Key”

Cutting key in progress and wait until success

Dolphin XP-005 cut STP22 key success. Test the new key.

Done.

www.vvdishop.com

http://blog.vvdishop.com/xhorse-dolphin-xp005-cuts-fiat-doblo-sip22-key/

Xhorse Dolphin XP005 Software Update to V1.2.7

Xhorse Condor Dolphin XP-005 key cutting machine software updated to V1.2.7 in Nov. 2019

V1.2.7 Dolphin XP005 Update Info:
* This version need to update firmware
* Fix some bugs
* Optimization the slope of track internal
* Optimization the slope and flat of VA2T
* Modified the tail file of HON66 and HU66
* Fixed the top abrasion invalid problem
* Fixed the M1 clamp key cutting error
* Fixed secondary processing cutting problem
* Fixed the cut problem of the customize key data
* Fixed firmware upgrade instability problem
* Fixed the cutting problem of FO21
* Fixed cutting problem of 4 Track external
* Add bluetooth error remind function

Condor XC-mini Self-Test “Drill Error Not Detected” Solution

Problem:

When doing Xhorse Condor XC-mini self-test height level adjustment operation, condor gave an error “Fail: Drill Error Not Detected” when cutting keys.

Must init PDE for change probe or drill.

Solution:

Please do:
machine main page—self test—electrical conductivity measurement,

follow the screen instructions, take a video about testing result and send us the operation steps.

We’ll analyse and report the result to you.

www.vvdishop.com

Condor XC mini plus & Dolphin XP005 feedback

Thanks to the genuine users of Condor XC mini plus & Dolphin feedback.

Condor XC mini ii review 1:

I did a 2010 Suzuki alto today with condor, hu133r kd blade worked perfect.

Condor XC mini plus review 2:

Decoded HU100 key today with Condor XC mini plus, sec e9 can not. Condor cut HU100 wrong, to wide track and to much to the left. Put in biting in sec e9, cut perfekt key, but can not decode.

Condor XC mini plus review 3:

Peugeot 107 is va6

Va2T on 107 up to 2013.
And I done one today. Decoded and cut perfectly.
Va6 decode by eye and enter manually on va2eh2 card.
I only see these on citroen DS and renaults in my day to day jobs really.

Condor XC mini plus review 4:

I decoded few of the older keys (HU64), so no problems there. Then took picture of the decoding and manually wrote the coding on HU64-3 and were no problems.

Condor XC mini plus review 5:

Dolphin and condor mini both use the same database

Condor XC mini plus review 6:

At first, Can’t cut Volvo HU56R, always overcut…2.5 mm cutter….

First, I was told ” you must set cutting -0,35 and all ok.”

Like this

Condor mini plus review 7:

The one on top is the original.
After cutting a key, that would not work, i calibrated the condor.
Cut a new key, showing in the picture.
Checked it with a caliper. Seems perfect.
But not opening the lock.
Org opens lock smooth.
Could it be the shoulder, shifting the blade of center?
Car is no longer in my shop, and this key, i send to customer.
what am I missing here, this key should work?!?

Reply: the hu64 has 3 type of the tip , the angle of those 3 types are different , the picture you put what above is hu64-3 , downside is hu64-2 , you need to choose correct angel of it , the shoulder is of the blade will effect nothing about open the lock ,

Condor XC mini plus review 8:

Condor mini PLUS contains no battery inside, need to connect with power cable.

Condor Dolphin review: 
Decode and cut HU64 old style blade: Result Success
Use bitting, and write into new style HU64-3: Result Success

This is the first time experienced that this actually works.
This has always failed in some way earlier.
Not sure if there was some update, which did the trick.

This door lock was in very good condition. It was working really smooth. Not adding any lubrication.

1,5mm which machine says is recommended.

How to Update Dolphin XP005 via Upgrade Kit?

How-to: update Xhorse Dolphin XP005 key cutting machine software/firmware and install driver using Upgrade Kit.

Preparation:

Download Xhorse Upgrade Kit

Download Dolphin XP005 Windows x32 x64 Drivers

Download Upgrade Kit and install setup

Update the Upgrade kit to the latest version

Connect Dolphin key machine with computer via USB cable

Turn on the Dolphin XP005 machine and connect it with the computer, it will show the BIOS on the screen of Dolphin as below,

Run the upgrade kit and choose ‘Find Device’, it will be show a small window , choose ‘Yes’ and will guide to install the driver

Choose the correct driver according to the machine as below, make sure you are shut down all protection before you install the driver, especially for windows 10 system

You need to download and install Windows driver for Xhorse Dolphin

After the driver has been installed, run the ‘Upgrade kit’ and choose ‘Find Device’ again, to see if you can see the device serial number and firmware version, do not chose ‘Upgrade’ until it you can see that , because if you can’t find device ,which means the driver is not been installed, and the machine will be blocked if you update it without driver

Press “Upgrade” and wait till the procedure completed

Update succeed.

 

www.vvdishop.com

Xhorse Dolphin XP005 adds Key Bitting Scanning Function

Xhorse App V1.6.7 adds key bitting scanning from photo function.

Xhorse App V1.6.7 Update:
Support connect more than 1 device at the same time
Support scan key bitting from photo
Improvement for online copy
Improvement for auto connect
Improvement for search remote

Xhorse DOLPHIN XP005 key cutting machine now with key scanning functions. Will improve more in time.

http://www.vvdishop.com/wholesale/xhorse-condor-xc-dolphin-key-cutting-machine.html