How to Cut Fiat Doblo SIP22 Key with Xhorse Dolphin XP005?

How -to: Decode and Cut SIP22 (FIAT DOBLO) Key with Xhorse Dolphin XP-005 key cutting machine.

Open Xhorse app and pair Dolphin XP005 via Bluetooth

Select Vehicle database function->Fiat->Doblo

Align M2 clamp

Decode Key

Decode key success

Start to duplicate new key

Left: new key    Right: original key

Press “Cutting Key”

Cutting key in progress and wait until success

Dolphin XP-005 cut STP22 key success. Test the new key.

Done.

www.vvdishop.com

http://blog.vvdishop.com/xhorse-dolphin-xp005-cuts-fiat-doblo-sip22-key/

Xhorse Dolphin XP005 Software Update to V1.2.7

Xhorse Condor Dolphin XP-005 key cutting machine software updated to V1.2.7 in Nov. 2019

V1.2.7 Dolphin XP005 Update Info:
* This version need to update firmware
* Fix some bugs
* Optimization the slope of track internal
* Optimization the slope and flat of VA2T
* Modified the tail file of HON66 and HU66
* Fixed the top abrasion invalid problem
* Fixed the M1 clamp key cutting error
* Fixed secondary processing cutting problem
* Fixed the cut problem of the customize key data
* Fixed firmware upgrade instability problem
* Fixed the cutting problem of FO21
* Fixed cutting problem of 4 Track external
* Add bluetooth error remind function

How to Update Dolphin XP005 via Upgrade Kit?

How-to: update Xhorse Dolphin XP005 key cutting machine software/firmware and install driver using Upgrade Kit.

Preparation:

Download Xhorse Upgrade Kit

Download Dolphin XP005 Windows x32 x64 Drivers

Download Upgrade Kit and install setup

Update the Upgrade kit to the latest version

Connect Dolphin key machine with computer via USB cable

Turn on the Dolphin XP005 machine and connect it with the computer, it will show the BIOS on the screen of Dolphin as below,

Run the upgrade kit and choose ‘Find Device’, it will be show a small window , choose ‘Yes’ and will guide to install the driver

Choose the correct driver according to the machine as below, make sure you are shut down all protection before you install the driver, especially for windows 10 system

You need to download and install Windows driver for Xhorse Dolphin

After the driver has been installed, run the ‘Upgrade kit’ and choose ‘Find Device’ again, to see if you can see the device serial number and firmware version, do not chose ‘Upgrade’ until it you can see that , because if you can’t find device ,which means the driver is not been installed, and the machine will be blocked if you update it without driver

Press “Upgrade” and wait till the procedure completed

Update succeed.

 

www.vvdishop.com

Xhorse Dolphin XP005 adds Key Bitting Scanning Function

Xhorse App V1.6.7 adds key bitting scanning from photo function.

Xhorse App V1.6.7 Update:
Support connect more than 1 device at the same time
Support scan key bitting from photo
Improvement for online copy
Improvement for auto connect
Improvement for search remote

Xhorse DOLPHIN XP005 key cutting machine now with key scanning functions. Will improve more in time.

http://www.vvdishop.com/wholesale/xhorse-condor-xc-dolphin-key-cutting-machine.html

How to find key biting in Dolphin XP005?

How to find biting in Xhorse Condor Dolphin XP005 key cutting machine?

Parts of the cars are missing biting on door lock/trunk lock if compare with ignition lock. Users can find out the unknown biting and replace the unknown biting as  “?”

1) Click on “Find biting”
2) Select a car maker
3) Select or put in the key blank type
4) Put in the known biting and replace unknown bitting as “?”. Then click on “Find Biting”

 www.vvdishop.com

How to use Dolphin XP005 to cut key by biting?

How to use Xhorse Condor Dolphin XP005 to cut key by biting?

Two ways of using the key bitting to make a key:

Method 1 :

Making a key without the original key.

1.Use some special tool to get the key bitting.

2.Break down the lock to read the key bitting on each metal of lock.

1) Click on “Cut by biting” on the main page
2) Select a key blank type
3) Select the ket type
4) Fix the key according to the picture show, select proper side of clamp and fix the key in correct position.
Put in the key bitting and check all the information before you click on “Cutting key” for make new key.

Method 2:

Making a key with the original key.

1) Click on “Cut by biting” and select a key blank type
2) Select the key type
3) Click on “Decode key” to duplicate key biting
4) Click on “Cutting Key”

www.vvdishop.com

How to use Condor Dolphin XP005 key duplication?

How to use Condor Dolphin XP005 key duplication?

Car models and years are needed for key duplication

1) Click on “Vehicle Database” on the main page
2) Select or type the car maker
3) Select the car model
4) Select the car model and year
5) Follow the tips on screen and correctly put the key on the clamp, click “Decode key”
6) After getting the original key bit, put an new blank key and click on “Cutting Key”

How to use Condor Dolphin XP005 key database

How to use Xhorse Condor Dolphin XP005 key database?

Three ways to make keys from the key database
1. Original key code card from factory
2. Key code information on lock for some car models
3. Other ways to get the key code.

1) Click on “All key lost”
2) Select a car maker
3) Put in the key code circled and click “QUERY”
4) Select the key series
5) The key bit will be automatically generate on the screen. Click “Cutting Key”

How to Calibrate Cutting on Dolphin XP005?

Xhorse Condor Dolphin XP005 cutting calibration tips:

1) Enter the operation main interface and click on “Machine Parameter”
2) Click on “Cutting Calibration”
3) Operate by following the tips and click on “Start”
4) Clean the cutter, probe and working area with a brush. Click on “Continue” or finish cutting  calibration.

How to Adjust Dolphin XP005 Headlight level ?

Xhorse Condor Dolphin XP005 Headlight level adjustment 

The system needs to initialize for first use. The steps as follows:

1) Enter Dolphin XP-005 operation main interface and click on ‘Machine Parameter’.

2) Click on ‘Height Level Adjustment’.

3) Adjust the heights of cutter and probe by following the tips on the screen, then click on ‘Start’.

4) After the machine has stopped, adjust the points of probe and cutter to the same level by following the tips on the screen. Then click on ‘Continue’.

5)  After the machine has stopped, select the diameter of the installed cutter, click on ‘Setting cutter diameter’ for finish height level adjustment.