How to Use Dolphin XP007 to Cut Laser Key?

Topic: how to cut laser key (Honda key) using Xhorse Dolphin XP007 key cutting machine successfully.

Prepare:

Xhorse Dolphin XP007 with clamp installed

The original Honda laser key

One new key

EIS

Insert the original Honda laser key into the right of clamp, calibrate it and fasten it.

Insert the new Honda laser key into the left of clamp, calibrate it and fasten it.

Turn on Dolphin XP007, point the probe at the new key and start cutting.

Clean the fixture.

Take the new key and start cutting another side.

Cutting complete.

Clean the fixture again.

Insert the new laser key into the EIS to test if it can work.

Done.

Youtube video demo:

Xhorse Dolphin XP007 tech support from www.vvdishop.com

http://www.vvdishop.com/service/dolphin-xp007-cut-laser-key.html

How to Replace Battery for Xhorse Dolphin XP005?

Topic: how to replace the old battery with the new one of Xhorse Dolphin XP005 key cutting machine.

PS: usually, the battery life is long enough that the user doesn’t need to replace it.

Look at the new battery of Xhorse Dolphin XP005 cutting machine.

Prepare:

One screwdriver

Procedure:

1. Lay the machine, face its base.

2. Use a screwdriver to loosen its screws and feet.

You will see the black box, that’s battery which is connected to the machine with 3 wires.

3. Unscrew all 8 screws on the two sides.

4. Remove the 4 screws on both sides of the battery.

Unplug the 3 wires to the battery.

5. The old battery is removed, ready to replace the new battery.

Please do from step 4 to step 1.

Xhorse Dolphin XP005 cutting machine tech support is supplied by www.vvdishop.com

http://www.vvdishop.com/service/replace-xhorse-dolphin-xp005-battery.html