Xhorse Dolphin XP005 Cut a Citroen CN22 Key

 Using Xhorse Dolphin XP005 Key Cutting Machine to cut a Citroen CN22 key should be installed with M3-B clamp.

 

Prepare an original key & a key blank.

Install the original key on M3 clamp beforehand.

Go to Xhorse app to control, press

Vehicle database >> Citroen >> All key blank >> CN22, 5 bitting, 830*370 >> OK >> Decode key >> Continue

Tip: please rotate the key to the position shown as pic.

Dolphin XP005 machine starts decoding…

When the key decoding is successful, it will tell the bitting codes on screen.

 

Replace the original key to install new key blank on clamp, press

Cutting key >> Continue

 

Dolphin XP005 machine starts cutting…

Wait until the key cutting is completed.

Take out the key to have a try, it is same as original one, and it does work.

Done!

It is quite simple to cut a Citroen CN22 key via Dolphin XP005 Automatic Machine, it takes me only 5 minutes to finish.

https://www.vvdishop.com/

Xhorse Condor Mini Plus 6.3.3. Adds All Key Blank Option

Xhorse Condor MINI/XC-MINI PLUS/Dolphin XP005 released new firmware version on May 25th, 2021. 

KM02/KM03  firmware version 6.3.3
KM05 firmware version 3.3.3
KM06 firmware version1.5.2
KM08 firmware version 1.1.8

APP latest version: Android2.2.2, iOS 2.2.1

2021.05.25
+ Condor machine add all key blank option
(From brand-all key blank)
+ Add parts of Chinese car models
+ Add Nissan Kicks key data
+ Add Maserati GranCabrio/GranTurismo key data
+ Add Ford Territory key data
+ Add Hyundai Verna key data
+ Add VW Tiguan L key data
+ Add Hyundai Mistra key data
+ Add Buick Regal key data
* Fix some key data issue

Duplicate BMW 320 E46 Key by Xhorse Condor XC-Mini Plus

 How to duplicate a BMW 320 E46 1999-2006 key by Xhorse Condor XC-Mini Plus key cutting machine?

 

Fix the original BMW key on clamp, press

Key duplication >> BMW >> 320 >> E46(1998-2006) >> Confirm >> Key decode

Condor XC-Mini machine will start decoding…

Press “Cut”.

Condor Mini Plus machine will start cutting…

 

Wait until one side cutting finished, then turn over the key to cut other side.

Done!

 

Using Xhorse Condor XC-Mini Plus Automatic Machine to copy a 320 E46 BMW key is successful.

https://www.vvdishop.com/

Xhorse Condor Mini Plus V3.3.2 Update Feature

 Xhorse Condor XC-Mini Plus (Serial Number KM05) software update to V3.3.2 in May 20th, 2021.

 

V3.3.2 New update

Add parts of Chinese models key data

Add Geely Dihao key data

Add Great wall C50 key data

Fix Condor cut by bitting display issue

Update the Xhorse Upgrage Kit to V1.7.4 or directly download on vvdishop.com

Then update Condor mini plus to v3.3.2.

Xhorse Dolphin XP005 Cut Subaru Forester DAT17 Key

 How to use Xhorse Dolphin XP005 Key Cutting Machine to cut a key for Subaru Forester lock when all key lost? Today I‘m gonna use a DAT17 key blank to do this job.

 

Having been read out the key biting codes: A-44223, B-32433, T2468.

Let’s go ahead to start:

Firstly, connect Dolphin XP005 machine in Xhorse app, press

 

All key lost >> Subaru >> Input lock code: T2468>> OK

 

Install M2-A clamp, tip align 2 position according to prompts.

Fix a DAT17 key blank flat on clamp.

The bitting codes are all correct, press

Cutting key >> Cut

 

Dolphin XP005 Machine starts working…

Wait until one side key cutting finished.

 

Clean the iron scraps, turn it over to cut other side.

Repeat same operations as before…

 

Alright, key cutting has completed!

Let me take out to have a try, it can smoothly open the lock!

Done!

This is using Dolphin XP005 Automatic Machine to cut a Subaru Forester DAT17 key successfully.

https://www.vvdishop.com/