Xhorse Dolphin XP005 Cut VW Golf 7 HU162T

 How to Cut VW Golf 7 hu162T with xhorse dolphin xp005 or xp005l? Dolphin does not show what type of hu162t it is.

First of all, check the key type by your eyes.

VW Golf7 has HU162T 9 cuts.

 

Xhorse Condor/Dolphin VW Audi New HU162T 9/10 Cutting Instruction

In Key bitting, select HU162T-10 or HU162T-9
For example, HU162T-9

Select 9 cuts and Side B

After cutting the front, go back to the previous page, choose to learn or input the 3 cuts on the side of the key, and choose the D side for the clamp. At this time, a blank HU162T key blank is required to be clamped by the auxiliary clamp.

http://blog.vvdishop.com/cut-vw-golf-7-hu162t-with-xhorse-dolphin-xp005/

Can I Cut Dimple Keys with Xhorse Dolphin XP005L?

 Question: Has anyone ever cut dimple keys on an Xhorse Dolphin XP005 or dolphin XP-005L.

No, Dolphin xp005 and xp005l will not cut dimple keys.  Xhorse Condor II or Dolphin XP007 will do.

 

Some other frequently asked questions about xhorse key cutting machines and dimple keys:

Q: Does condor mini plus ii cut dimple keys like keso, kaba?

A: Yes it does. Require M5 clamp.

 

Q: What cutter to use with condor 2 to cut dimple keys?

A: Dimple cutters are optional accessories and are available separately.

Q: What cutter to cut dimple keys with dolphin xp007?

A: With the original cutter in the xp007 package.

Q: Where to get cutters for dimple keys for this machine XP005?

A: No possible with xp005, go for Condor II.

 

Q:Which xhorse key cutting machine will cut dimple tibbe and barrel keys?

A: Condor II.

 

 

Q: Will Xhorse Condor ii customize dimple key?

A: Yes, it will.

 

Q: Can the Condor XC-Mini Plus II machine copy dimple keys directly and by code… e.g. Abus, Bks, etc.?

A: Yes, it can.

 

 

Q: Can the condor ii cut Yale Dimple key like this?

A: Yes, it will.

 

 

Q: Will Condor II cut multi lock dimple keys?

A: Yes, Dolphin XP007 will do as well.

Here is an example with condor ii

http://blog.vvdishop.com/xhorse-condor-mini-plus-ii-duplicate-mul-t-lock-dimple-key/

Xhorse Dolphin XP005 “Select Device Not Found”

 Problem:

My xhorse dolphin xp005 did not connect with computer when i tried to update machine via Upgrade kit.

Error device not found. Replug device and try again. No luck. Any solution?

Solution:

Reinstall Xhorse dolphin xp005 driver, then replug device to try again.

Download  XP-005 Dolphin Windows x32 x64 Drivers

Make sure you have disabled all anti-virus programs before installing driver.

If still not working, change another laptop and run upgrade.

If update ok on Win7, but failed on Win10, you also need to disable Driver Signature Enforcement.

Xhorse Dolphin XP005 Cut PSA SX9 Key Blade

 What’s the best way to cut key PSA with SX9 blade using xhorse dolphin xp005?

These are good suggestions from dolphin users, try them out until you succeed.

 

Suggestion 1:

For the cut on top I have use this clamp (dolphin xp005l m5 clamp). For side cute I have use universal duplication

 

Suggestion 2:

Use the XP005 for the 2 first sides And then use a manual Condor XC-009 for the 2 other sides, works perfectly. You can move the new key for better cutting.

 

Suggestion 3: 

I found a good way

First step: cut by decoding with « 5 bitting » program

Second step: cut using 4-5 bitting programs and stop the program halfway

2 programs on the tablet
1st stage I cut only the edges with the program 5 bitting by decoding
2 stage program 4-5 bits I manually entered the bits to strawberry, and in the middle of the program when it asks you to turn the key I simply stopped.

Xhorse Condor 2 Breaks 1.5mm Cutter when Calibration?

Problem:

I have a problem with my xhorse condor mini plus 2! I am new at this work. I have broken 4 milling cutter (1.5mm) the latest I broke is yesterday when i make a update and I want to recalibrate  I use 1.5 mm cutter for calibration. when I start the machine I put hon66 calibration key but not a blank key I have used this key before for calibration and It broke 1.5 milling cutter.

Solution:

You set the blade speed to the highest speed. Don’t put max speed. The rule is to slow down.

Use cutter 2.5mm to cut any type of key without changing. You will not find any problems at work.

If not working, put di-electric compound on the tip of your probe and cutter. After that do an electric conductivity test before calibrating under the device information tab at the bottom of your Keytool Max or Xhorse App. It sounds like you’re probe and/or cutter is not getting proper electrical conductance.