How to Solve Dolphin XP005L Calibration Error Code 6

 Problem:

One of our customers failed to calibrate the Xhorse Dolphin XP005L key cutting machine. The dolphin ii reported error code 6 during the calibration process.

Possible solution:

Open the back cover and adjust the X-axis sensor or baffle.

User feedback:

He checked and found this part is broken.

Final solution:

Need to replace the X-axis sensor.

Better replace the sensor of other axes to the X-axis and do an X-axis motor test first to see if there are any other problems.

Then send the test result to us.

 

www.vvdishop.com

How to Measure Xhorse Dolphin XP005 Battery Voltage?

 We have already shown how to remove the shell and test the battery voltage for Xhorse Dolphin XP005/XP005L key cutting machine.  Some people don’t know how to measure voltage.

Here we will show how to measure battery voltage in detail.

It’s best to take photos to ensure that the gear and pins are correct.

1. Select DC power supply gear, please measure the voltage of these two pins of the battery on the picture below and send us the test result.

2. Please measure the voltage of these two pins of the mainboard follow the step below and send us the result.

First, unplug these two cable on the motherboard

Turn the multimeter to this setting (Diodegear)

Measure the volts of these two pins, and take us a photo like this.

and measure these other two pins value.
(Note the color of the meter pens in the diagram)
www.vvdishop.com

How to Use Xhorse Condor Dolphin Modify Key Function

 Xhorse Condor/Dolphin XP005 key cutting machines have built-in Modify key (Modify Common Key) function that many people did not notify.

 

When do you need this feature?

Let’s say you’re on a job, and you’re out of blank you need. You know you have keys larger and just wish that your machine could mill down one to the size you need.

It is a feature that is BUILT-IN in Condor/Dolphin!

 

How to use this feature?

Click ‘Cut by Bitting’. Top right button ‘Modify key’. You can search or look through their info.

A Dolphin user just tested out a KLR key. These aren’t made available yet and the only source has been eday. It just milled down a DAT17 to KLR specs! It’s ready to be cut now! This might only be for high security keys, but it’s something!

 
This can be done with so much more! And you could even mill down flip keys to something you need! It’s a reason you may want to stock a micrometer with metric next to your key machine.

 

This feature is available on both new and old Condor or dolphins.

www.vvdishop.com