Today I’m gonna cut a 2004 Mini Cooper HU92R mechanical key with Xhorse Dolphin II by bitting. Before that, you should get the bitting codes. Since I’ve used LISHI HU92 to decode the lock, let’s go straightly to cut the key.
Cut by bitting >> HU92R >> 820*4100 8 bitting, cut depth 1.25mm >> OK
Follow the prompt to install key blank.
Tip align 2nd position on M5 clamp side B.
.jpg)
.jpg)
.jpg)
.jpg)
Input bitting codes on screen: 3122 3443
Cut key >> Cut
The Dolphin 2 machine will start to cut automatically…
Just wait until it finished.
Then flip over to cut the other side.
Take out the key when key cutting was completed.
It can work perfectly.
Real quick and easy job.
.jpg)
.jpg)
.jpg)
