12/19/2018

How to use Condor Mini M4 Clamp to Cut YA226 House Key?

How-to: use Xhorse Condor xc-mini /xc-mini plus key cutting machine and M4 Clamp for house key trace and cut YA226 by universal type menu.
condor-mini-m4-clamp-ya226-house-key-1
condor-mini-m4-clamp-ya226-house-key-2
New Xhorse M4 Clamp is used for housekey. It comes with stopper and 2 size of lifting wires
How to trace and cut Yale YA226 key?
condor-mini-m4-clamp-ya226-house-key-3

condor-mini-m4-clamp-ya226-house-key-4
Change to M4 clamp
condor-mini-m4-clamp-ya226-house-key-5

condor-mini-m4-clamp-ya226-house-key-6
In Condor Mini, choose Key Duplicating->Universal Type 
condor-mini-m4-clamp-ya226-house-key-7
Choose key type. In Yale YA226: Standard single sided
condor-mini-m4-clamp-ya226-house-key-8
condor-mini-m4-clamp-ya226-house-key-9
1.Keep the key/probe/fixture clean.
2.Recommended to use M1, M4 clamp and 1.5mm drill(cutter). Here we use M4 clamp.
Change menu M1 to M4
condor-mini-m4-clamp-ya226-house-key-10
Use tracer: 1mm and cutter 1.5mm
condor-mini-m4-clamp-ya226-house-key-11

condor-mini-m4-clamp-ya226-house-key-12
 Put stopper on Yellow arrow line and lock key
condor-mini-m4-clamp-ya226-house-key-13
Tracing bitting process…
condor-mini-m4-clamp-ya226-house-key-14
Show bitting
Show tracing bitting again
condor-mini-m4-clamp-ya226-house-key-15
Put new blank key to M4 clamp 
condor-mini-m4-clamp-ya226-house-key-16
Press Cut and close shield
condor-mini-m4-clamp-ya226-house-key-17
Cuttin in progress
condor-mini-m4-clamp-ya226-house-key-18
Cutting YA226 house key success
condor-mini-m4-clamp-ya226-house-key-19
Test the new key, it works perfectly.

10/08/2018

Free Download Xhorse Condor Key Customize Tool 1.1.7 & 1.2.0

How to use Xhorse Condor XC-Mini key cutting machine key data customize tool and where to download for free? Check below:

Here is latest 1.1.7 and 1.2.0
however 1.2.0 not show database inside
condor-key-customize-tool-01

condor-key-customize-tool-02

condor-key-customize-tool-03

condor-key-customize-tool-04
How to use Condor Mini Key Data Customize Tool?

Condor XC-Mini customizes a key in 6 steps:
1. Open the Key Data Customize Tool
condor-xc-mini-key-data-customize-tool-1

2. For example, customize a Corolla, right click on “Toyota” to Choose “Add key”
condor-xc-mini-key-data-customize-tool-2

3. Measure the values follow the schematic diagram and fill in the corresponding place
condor-xc-mini-key-data-customize-tool-3
condor-xc-mini-key-data-customize-tool-4

condor-xc-mini-key-data-customize-tool-5

condor-xc-mini-key-data-customize-tool-6

condor-xc-mini-key-data-customize-tool-7

4. Click Save, add a key file successfully. You can see it on your list. and you can export the date out and import to another customize tool, then Synchronize it to Condor
condor-xc-mini-key-data-customize-tool-8

5. Connect the condor xc-mini USB to the computer, click “Synchronize”
condor-xc-mini-key-data-customize-tool-9
condor-xc-mini-key-data-customize-tool-10

condor-xc-mini-key-data-customize-tool-11

6.You can find the file you customized in the “Key Duplication”
condor-xc-mini-key-data-customize-tool-12

condor-xc-mini-key-data-customize-tool-13

condor-xc-mini-key-data-customize-tool-14

9/04/2018

How to Change the Chargeable Battery of Condor XC-Mini

This is the Power Supply Adapter with Battery for Xhorse Condor XC-Mini key cutting machine. No need to connect Car inverter, battery as power supply, easy to carry out. Support household electricity and cigarette lighter to recharge or use as power supply.
condor-xc-mini-battery


List of rechargeable battery of XC-Mini

① Mainboard 
② Cable of 6 & 7 
③ Battery charger & display module 
④ Vehicle charging line 
⑤ Adaptor 220V


Specification of rechargeable battery of XC-Mini:
Standard voltage 25.9V 
Limited charge voltage 29.4V 
Rated Capacity 2500mAh 
Power Ra 73.5Wh 


Note: The update version Condor XC-Mini Plus with built-in battery is coming soon. Don't need to change chargeable battery any more.



Instruction of how to change the built-in battery of Condor MINI:

change-battery-condor-mini-1
Remark: please follow the procedure to operation in case of damage the Mainboard ,do not connect the power during operation

Attention : For your security, do not connect the power in next steps

change-battery-condor-mini-2
1 , Take off those 4 screws like the picture show 
change-battery-condor-mini-3
2 , Push the motor inside and hold the white buckle then take out the emergency-stop module like the picture show
change-battery-condor-mini-4
change-battery-condor-mini-5
3 , Loose the connection of position 11 &12 like picture show
change-battery-condor-mini-6
4 , Use a screw to make the connection those two cables what are from position 11 & 12 like the picture show ,and use the acetate tape fix the connection well 
change-battery-condor-mini-7
5, Fix the cable 6 to the position 12 , cable 7 for position 11 , then put the emergency – stop module back and fix it well
change-battery-condor-mini-8
6, Take off those 2 screws like picture show
change-battery-condor-mini-9
7, Turn over the Mini Condor and take off the foot rubber and 
change-battery-condor-mini-10
8, Take out the Power-board and disconnect all cables like picture show
change-battery-condor-mini-11
9, Use the battery charger & display module to replace the original power interface like picture show 
change-battery-condor-mini-12
10 , Fix the cable into the socket according the number between the cable and socket ,make sure very cable will be fix well
change-battery-condor-mini-13
11, Fix the cable of 24V and cable of GND in the right position like picture show
change-battery-condor-mini-14
12, Connection the power like picture show then put back the Mainboard and fix it well
change-battery-condor-mini-15
13, Fix the all cables after put back the mainboard , the mainboard should be in fixed very solid ,manage the cables again if not , then fix the foot rubber and screws 
change-battery-condor-mini-16
14, Fix those screws like picture show
change-battery-condor-mini-17
15 , The screen , LED , display of battery charger should be on after you press the emergency – stop button , if not ,check the connection again

Remark : electricity volume will be show by the green light , the LED that is mark ‘’ CHRG ‘’ should be green if it is charged , it will be red during charging.