How long do Xhorse Dolphin mill cutters usually last?

 How long do the mill cutters usually last on the Xhorse dolphin XP-005? This is a commonly asked question.

It all depends on what you cutting, each key blank is different.

You should notice that the keys you cut don’t work as smooth as the other ones you did, it may be very slight, but pay attention and you will see what I’m talking about.

I change mine once a month at a minimum.

I would say I cut about 100 keys a month, but I can also go a couple days without cutting a single key. that’s why I change the cutting bit at least once a month.

Many did maybe 30 keys on mine 2.5 mm and 20 keys on 1.5mm cutter.

 

Free Download Xhorse Condor II Apk

 Here comes the problem:

I got the Xhorse condor ii key cutting machine and registered. But it goes back to the main interface and asks to register again. Any idea how to fix it?

Error images are shown as below:

Solution:

Make sure you have connected to a strong wifi.

Go back to the main interface.

Open browser and download xhorse condor 2 apk here

Install apk (run and try agian. Don’t need to delete old apk)

http://i.xhorse.com/deleted/keytoolplus2.apk 

How to Use Xhorse Condor II Manual Cutting?

 Manual cutting is a special function of Xhorse Condor XC-Mini Plus II, which enable users to modify & shape key blanks. Does this ever happen to you? You need to duplicate a key, but all the key blanks at hand are too thick or too wide. At this time, you can use the xhorse Key Cutting Machine to cut key blank thin or narrow key blank.

 

How to Use Manual Cutting?

Check video:

https://www.youtube.com/watch?v=hKbUPgPGLnI

 

Condor Mini Plus path:

Manual cutting >> Normal modes/ Line mode

Normal Mode

In normal mode, the cutter will start to work automatically if you press “Start spindle”. by pressing X/Y/X button, you can move the cutter to modify key blank. So you may need to mark the key blank as needed early.

 

On the left side of screen, you can adjust how fast the cutter moves and its single step distance.

 

2. Line Mode

Line mode differs normal mode in points recording and automatic cutting. Based on the shape of the original key, you can mark the key blank first and record the points. Then Xhorse Condor II would cut the key automatically in accordance with the points recorded.

 

Under this mode, you can not only thin or narrow key blank, but also modify key blank into different shapes(mostly modify the key tip).

 

Refer to the post for detailed procedure:

Xhorse Condor XC-Mini Plus II Duplicate Honda Civic Pretty Thin Key

http://blog.vvdishop.com/xhorse-condor-xc-mini-plus-ii-duplicate-honda-civic-pretty-thin-key/

http://blog.vvdishop.com/use-xhorse-condor-xc-mini-plus-ii-manual-cutting/

Xhorse Key Reader + Dolphin Identify & Cut Honda Activa 5G Key

 This is a quick demonstration on using Xhorse Key Reader XDKR00GL + Panda XA-006 or Dolphin XP005/Dolphin II to read & cut a Honda Activa 5G key. Beyond that, Key Reader also supports connecting other Xhorse Key Cutting Machines or work alone. Let’s take a look how easy to operate it.

Connect to Panda key cutting machine firstly.

Optional identification >> Honda(Cycles) >> Activa 5G >> OK

Insert key blade vertically into Xhorse Blade Skimmer slot.

Identification >> Identification

Identification successful.

Bitting codes were shown on screen: 12112313

 

We can go on to cut key directly.

Install a blank key on clamp.

Cutting key >> Continue

Xhorse key cutting machine will start cutting automatically…

Cutting key completed.

Compare the new key to working key.

They are same.

New key can switch lock perfectly.

Done.

www.vvdishop.com

Xhorse Dolphin XP005 Select Device Not Found Solution

 Problem:

I am experiencing a problem it is impossible to update xhorse dolphin xp-005 key cutting machine. It asks me to connect to the PC but the software does not find the machine. Has anyone ever encountered this issue? Thank you

Solution:

Missing USB driver. Install USB driver.

 

 

Feedback:

Changing PC + downloading drivers on VVDISHOP. From now on the update ok. Thanks for the help!

Free download Dolphin XP-005 Drivers for Upgrade Firmware / UpgrateKit

https://mega.nz/#!6vgy1IKQ!q1OFWsXyDQs8wbkv6OZ5fHGxsdEGEYUV1i2dWTpyDf4