Xhorse Dolphin XP005L Cannot See WiFi Solution

 Problem:

My Xhorse Dolphin xp005l key cutting machine was not activated.

Does not see the wifi network. The machine freezes on searching for a wifi network. There is a WiFi network, but xp005l does not see them.

Solution:

Restart dolphin ii machine, if not working, connect WiFi via 2.4GHZ phone hotspot.

How to Fix Xhorse Key Reader Cannot Identify Key Bitting?

 Problem:

My xhorse key reader cannot identify key bitting anymore. It starts Scanning the key and never ends. Any solution?

VVDISHOP working solution:

1).  Update xhorse key reader

in Xhorse App, go to Optional Identification

Update xhorse key reader firmware via WiFi (Don’t forget to open WiFi)

2) Calibrate key reader

Keep press the key reader icon until it shows “Calibration”, calibrate the device

3). If failed, open device, check if this cable gets loose and replug it.

 

Xhorse Condor XC-009 vs Dolphin XP008

 Xhorse mini mechanical manual key cutting machine Dolphin XP-008 and Condor XC-009 which one to choose?

 

Check table comparison below:

Item	Xhorse Condor XC-009	Xhorse Dolphin XP-008
Image
With Battery	Built-in Lithium battery 60-100 keys cut in one charge	Built-in Lithium battery
Support Key Types	For Single-Sided and Double-sided Keys, flat keys for bikes, cars and domestic locks	For Bit/Double Bit/Dump keys, and safe deposit box keys
Input Frequency		47-63Hz
Spindle Speed	1800rpm	1050rpm
Travel of table	95mm	46mm
Power	200W	145W
Input Voltage	12V-18V/3A	12V DC
Motor Torque	1.2Nm	1.32Nm
Net Weight	10.66kg	10.8Kg
Gross Weight	12Kg	12.5Kg
Clamp	4-side clamp	All-purpose 3-side clamps
With LED indicator	Yes	Yes

Dolphin XP008 and Condor xc009 are different manual duplicators.  XP008 is designed to cut bit/pump and safe deposit box keys. XC-009 can duplicate flat keys for bikes, cars and domestic locks.

www.vvdishop.com

Xhorse Condor II Cut Kwikset Schlage House Keys

 Kwikset & Schlage cut are the newly added functions on Xhorse Condor XC-Mini Plus II key cutting machine for household keys. As long as you have the M4 Clamp& bitting codes, household key cutting is an easy job.

 

How to cut a Kwikset key on Condor II?

https://www.youtube.com/watch?v=MgORz31GApA

 

Household key >> Kwikset >> Other >> KS1FT

M4 Clamp should be shoulder align.

Put a new key blank on clamp.

 

Input its bitting codes:24374

Start cutting >> OK

Condor Mini Plus will starts cutting automatically.

 

Just wait until 100% completed.

Perfectly done!

How to cut Schlage key on Condor II?

https://www.youtube.com/watch?v=2bMz4RhH9eU

 

Household key >> Schlage >> Other >> SH7

Fix a new key blank on M4 Clamp firmly.

 

Enter key bitting codes: 487472

Start cutting >> OK

Condor 2 Machine will finish the cutting automatically.

Just let it do.

 

When cutting is completed, we can see it did a great job.

*Only Condor II has house key database.

Xhorse Key Cutting Machine is specially designed for locksmiths to experience smart & easy key cutting. Follow us to learn more new features and developments.

www.vvdishop.com

How to Solve Xhorse Dolphin Condor Probe Breaking Problem?

Sometimes your Xhorse Dolphin or Condor key cutting machine will break probes when it tries to decode key blades.  Here’s the useful tips to solve or avoid probe breaking problem.

1). Update the app and software. Keep app and software up-to-date.

2).

Check if battery is good. Make sure the charger it’s not connected and keep a good backup amount just in case.

3).

 Always clean blade well before decoding. Probe knows it is touching the key by an electrical circuit being completed, if you break a tip itsa because the circuit didn’t complete, dirt is the reason.

And always have 5 or 10 probes in stock. The xhorse key cutting machine uses electric current to detect the blade, if it has dirt or grease on the blade, it will break.

The blade is too dirty and has no electrical conductivity.Or the key blank isn’t clear enough. Clean it with alcohol first.

4). Recalibrate the machine.  Calibrate it again when you get the new one and will make sure about the blade.

5).  Do a conductivity test/ electrical conductivity measurement to roughly test which is abnormal, probe or cuter. The probe decodes keys using electrical conduction and sometimes the probe gets light surface rust preventing it from reading your key properly. There is also a conductivity test under the Device Information tab on the app.

Xhorse Dolphin XP005 Electrical Conductivity Measurement?

6). It may be that the ground wire inside the machine is broken.

Sometimes, there’s a ground cable that needs to be replaced. That’s the one that detects, but this need replace only when prob breaks all the time. You need to open the machine and change it.

Check instruction here

Other option:

Take the optical reader (xhorse key reader decoder) it prevents breaking guides.