How to Connect Xhorse Condor/Dolphin with Key Reader?

 Question: how to connect the new xhorse dolphin xp005l with key reader?

 

Here’s the tips to connect xhorse key reader with condor/dolphin key cutting machine:

Dolphin XP005, Dolphin XP005L, Condor Mini Plus connects key reader via Xhorse app on mobile phone

The new Condor XC-Mini Plus II connects with key ready directly without mobile phone.

 

 

Connect key reader with Xhorse App via WiFi or Bluetooth:

Turn on both xhorse key reader and dolphin/condor
Turn on Bluetooth connection on xhorse app
In xhorse dolphin/condor app, press Select, let it seach devices. You will see 2 devices are connected
Select Optional identification function in the Xhorse app
Select brand and start using key reader

Demo guide & review: http://blog.vvdishop.com/xhorse-key-reader-review-identify-7-car-keys-fast/

Connect key reader with Condor II within machine instruction will be updated soon.

Dolphin XP005 Decode & Copy Ford HU101 with Xhorse Key Reader

 How to use Xhorse Key Reader + Dolphin XP005 to decode & duplicate a flip key for 2017 Ford F250? Follow the operation below I’m gonna show you.

Prepare a Ford working key.

Connect to Dolphin XP005 in Xhorse app, click

Optical identification >> Ford >> All key blank >> HU101 >> OK

Install M2-A clamp & key blank as prompted.

 

Connect to Key Reader Skimmer.

Open Key Reader key slot to insert the key.

Click “Identification”.

Key Reader will start reading…

 

Identification successful.

Key bitting: 4312242135.

It actually sends a picture of the key, so we can take a look at it.

Visually inspect to make sure that Key Reader read it right.

Everything looks good, bitting codes are accurate.

 

So we can go ahead and send it to Dolphin XP-005 Machine for cutting directly.

Click “Cutting key >> Cut”.

Dolphin XP005 starts cutting…

Just repeat same command to cut the other side.

After cutting was done.

Take out the key to have a try.

It can open the truck door and turn ignition.

Perfectly done!

This is using the new Xhorse Key Reader blade skimmer to copy a HU101 10 cuts blade successfully.

www.vvdishop.com