How to Solve Xhorse Dolphin XP005 Error Code 56do?

 Problem:

I got a problem with xhorse dolphin xp005 key cutting machine, axis motor is not working and app says error code 56. Any clue?

Solution:

Solution 1:

Clean everything with solvent and don’t update it put an older version so the error is erased and don’t put the last update

 

Solution 2:

vacuum, clean from shavings. lift it air flip. shake. restart BRUSH. Done. Again, if happened?! Repeat, Do step one.

 

Feedback:

solution 2 works no problem. xhorse dolphin now is working properly.

Tips to Cut Renault Clio 2017 VA2EH2 with Xhorse Condor II

Problem:

I had some issues last days with my Xhorse Condor Mini plus 2 key cutting machine.

I wanna cut emergency key blade for a Renault Clio from 2017. The key blade was not on the list.

Strange because there is a lot of new Renault’s with keycard. Ex. Clio 4, Captur, etc.

Machine showed and cut a little different key. So it’s not opening the car.

Solution:

Option 1:

Just use universal duplication.  Clean original key and use universal duplicate

Option 2:

look under VA2EH second one down. You’ll see it has a different series. Decode under that and cut.

Number 2

Feedback:

universal solution works. I can confirm that.

Xhorse Condor Mini Plus Cut Ford Jaguar FO21 Tibbe Key

 Xhorse Condor XC-Mini Plus Key Cutting Machine supports to cut FO21 tibbe keys for Ford Transit and few Jaguar cars. It needs to install M3 Clamp Fixture. Following I’m gonna show how to cut a 2012 Ford Transit Connect tibbe key.

Step 1. Put the key flat on M3 clamp, and install to Condor Mini Plus.

 

Step 2. Get its key code: 424312.

Step 3. Select car model, follow the prompts to start cutting:

Put it flat on 0 position.

Move it to the 2 position. Press “Cut”…

Move to 3 position. Press “Cut”…

Move to 4 position. Press “Cut” …

Moveto2 position…

Move to 3 position…

Move to 4 position…

Flip the key completely 180 degrees.

Just repeat the above process on the other side of the key.

Once it’s done, it should look like this, cut from both sides.

That’s pretty much it.

It’s really easy. The new key can open all doors!

 

This is how to cut a FO21 tibbe key with Xhorse Condor Mini Plus.

www.vvdishop.com

How to Solve Xhorse Condor Mini Error Code 45?

 Problem:

My xhorse condor xc-mini plus key cutting machine keeps getting error cut fail code 45, anu solution?

Solution:

Upgrade condor mini plus with xhorse upgrade kit.

Select Condor device

Do Repair data-> Fix internal error 1-> Fix internal error 2-> Clear All (3 times)

Then update software.