9/15/2022

Xhorse Condor Mini Plus Cut Ford Jaguar FO21 Tibbe Key

 Xhorse Condor XC-Mini Plus Key Cutting Machine supports to cut FO21 tibbe keys for Ford Transit and few Jaguar cars. It needs to install M3 Clamp Fixture. Following I’m gonna show how to cut a 2012 Ford Transit Connect tibbe key.

Xhorse Condor Mini Plus Cut Ford Jaguar FO21 Tibbe Key 1

Step 1. Put the key flat on M3 clamp, and install to Condor Mini Plus.

Xhorse Condor Mini Plus Cut Ford Jaguar FO21 Tibbe Key 2

 

Step 2. Get its key code: 424312.

Xhorse Condor Mini Plus Cut Ford Jaguar FO21 Tibbe Key 3

Step 3. Select car model, follow the prompts to start cutting:

Put it flat on 0 position.

Move it to the 2 position. Press “Cut”…

Move to 3 position. Press “Cut”…

Move to 4 position. Press “Cut” …

Moveto2 position…

Move to 3 position…

Move to 4 position…

Flip the key completely 180 degrees.

Just repeat the above process on the other side of the key.

Xhorse Condor Mini Plus Cut Ford Jaguar FO21 Tibbe Key 4

Xhorse Condor Mini Plus Cut Ford Jaguar FO21 Tibbe Key 5

Xhorse Condor Mini Plus Cut Ford Jaguar FO21 Tibbe Key 6

Xhorse Condor Mini Plus Cut Ford Jaguar FO21 Tibbe Key 7

Once it’s done, it should look like this, cut from both sides.

That’s pretty much it.

It’s really easy. The new key can open all doors!

 

This is how to cut a FO21 tibbe key with Xhorse Condor Mini Plus.

Xhorse Condor Mini Plus Cut Ford Jaguar FO21 Tibbe Key 8

Xhorse Condor Mini Plus Cut Ford Jaguar FO21 Tibbe Key 9

www.vvdishop.com

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.