Xhorse Condor Mini Plus Cut Plastic Keys

 How to cut plastic car keys using Xhorse Condor XC-Mini Plus? The VW Passat/CC and old BMW all have plastic keys for emergency blade, so this is a very useful tip for locksmiths. You can follow the tip if you have any other Xhorse Key Cutting Machine.

*You can’t nornally just put the plastic key on clamp for direct decoding or cutting.

 

• You should LISHI the door or figure out the bitting codes at first.

 

• Then once you do that, put a metal key on the clamp and perform “Cut Key”. When the probe dedects it, pause Xhorse Condor machine right before it starts cutting.

 

• Change the metal key into plastic key and put it on the clamp.

 

• Hit “Cut” to continue key cutting. You can just repeat the same operation for the other side cutting.

That’s the key we cut it now. Let’s test it.

Yep, so it does work, it can open the door.

Done.

www.vvdishop.com

How to Tell VAG HU162T 8-Cut, 9-Cut and 10-Cut Keys?

 As titled, how to distinguish VAG HU162T 8-Cut, 9-Cut and 10-Cut key blades? So we can properly cut keys using xhorse dolphin or condor key cutting machines.

The picture shows the side of the 3 keys.
From top to bottom, they are 8-cut, 9-cut and 10-cut.

 

The 8-cut (HU162T (8)) key is the easiest to distinguish.

It has only one fixed cut on the side and is straight.
The effective surface is on the top.

 

The 9-cut and 10-cut key can be quickly distinguished by the position of the effective surface.

The effective surface of 9-cut key is on the top, while the effective surface of 10-cut key is on the bottom.

It is also possible to distinguish them by the number of cuts.
9-cut key has 3-side cuts

10-cut key has 4-side cuts.

https://www.vvdishop.com/service/distinguish-vag-hu162t-9-cut-9-cut-and-10-cut-keys/