Xhorse Condor Motor Test Failed Error 55 Solution

 Here comes the solution to Xhorse Condor XC-Mini Plus or Condor II movement abnormal and error code 55 problem.

Phenomenon: There is an abnormal noise when the X/Y/Z axis self checks and moves after Condor machine is turned on, Or there is abnormal noise when one of the X/Y/Z axis moves during the process of decoding or cutting keys;

 

Solution: Go to device self test – motor measurement- perform X/Y/Z motor testing separately (Refer to the following picture for the entry method)

Normal situation: ‘OK’ will be displayed at the bottom of the test interface, as shown in the picture;

Fault situation: A certain axis at the bottom of the interface will display ‘Bad’, indicating that there is a fault with this axis and the corresponding sensor needs to be replaced,

As indicated by the arrow on the right, it represents that there is a fault in the current Y-axis and the Y-axis sensor needs to be replaced;

Check

picture 1 shows the positions of Z-axis and Y-axis sensors;

picture 2 shows the appearance of the old sensor;

picture 3 shows the appearance of the new sensor.

If it is a fault with the X-axis sensor, please contact technical support as the steps for replacing the X-axis sensor are quite complicated.

How to Tell if Xhorse Dolphin II Battery is Dead?

 XHORSE Dolphin XP005L Battery Working Principle & Charging Failure Analysis:

1. Battery Structure

• The battery consists of 7 individual cells managed by a Battery Management System (BMS).

2. BMS Communication Failure Symptoms

• If the battery charge level is missing from the display, the BMS has stopped communicating. Possible causes:

  • The green connector is not fully seated in the battery pack.

• • The BMS entered sleep mode due to critically low pack voltage (non-recoverable if voltage drops too low).

3. Charging Failure Causes

• Failed cell(s): A single faulty cell can prevent charging.

• Voltage imbalance: The BMS halts charging if cell voltages deviate beyond safe limits.

A battery refusing to charge can be caused by a failing cell in the battery pack. To diagnose:

1. Go to Settings and touch the Battery to open the battery screen.

2. On the VS, you will see the voltage of each cell.

3. The 8th and final voltage reading shows the difference between the highest and lowest cell voltages.

The BMS will likely stop charging if it detects an abnormal cell voltage.

Xhorse Dolphin XP005L Stuck on Firmware Update Solution

 Problem:

Xhorse Dolphin XP005L can’t seem to get it to update any ideas? Straight out the box. Stuck on firmware update interface.

Solution:

Update: got it fixed and only needed to remove the bottom metal plate and remove a green plug and rebooting it and downloading the firmware again.

When finished i simply turned it off and plugged it back in then reinstalled bottoms plate.

Xhorse Condor II Cannot See M3 or M4 Clamp Selection?

 Problem:

What happened to Xhorse Condor II clamp 3 and 4 selection? No more tibbe keys? No more single-sided key either?

Solution:

Just enter the blade option which need use M3 or M4, and the option will tell you.
You can refer to “vehicle database——Ford——F021”.

Xhorse Dolphin II and CGDI Godzilla Which is Better?

 Choosing the right key cutting machine is crucial for locksmiths, whether you’re a mobile professional or shop-based. Two top-tier options are the Xhorse Dolphin XP005L (Dolphin II) and the CGDI Godzilla. Here’s a detailed comparison to help you decide which one suits your needs.

Dolphin II vs. CGDI Godzilla Comparison

1. Unbeatable Portability

The Dolphin II is designed for locksmiths on the move. Its compact, lightweight build and built-in rechargeable battery allow you to take it anywhere – whether you’re servicing cars, homes, or businesses on-site. No need for a constant power source like the Godzilla, which ties you to a shop.

 

2. Advanced Touchscreen & Wireless Connectivity

• 5-inch adjustable touchscreen for effortless operation.
• Bluetooth & Wi-Fi support for seamless software updates via the Xhorse app.
• Over-the-air updates ensure your machine always has the latest features and key compatibility.

 

The Godzilla lacks wireless capabilities, meaning manual updates and fewer tech-forward advantages.

 

3. Superior Clamp System & Key Compatibility

The M5 Clamp on the Dolphin II handles a wider variety of keys with precision, including high-security and automotive keys. While the Godzilla can cut standard keys well, it doesn’t match the Dolphin’s adaptability for modern locksmithing needs.

 

4. Future-Proof Investment

With regular software upgrades, the Dolphin II evolves with industry trends, ensuring long-term usability. The Godzilla, while cheaper upfront, may require costly replacements or upgrades sooner.

 

Godzilla: A Good Machine, But Not the Best

The CGDI Godzilla is a budget-friendly, durable option for shop-based locksmiths, but it lacks:
– Portability (no battery, requires constant power)
– Wireless features (no Bluetooth or Wi-Fi)
– Latest tech advancements (manual updates, no touchscreen.

Conclusion: The Dolphin II Wins

CGDI Godzilla is ideal forLocksmiths who prioritize durability and affordability for a fixed workstation.

 

If you want a high-performance, portable, and future-proof key cutting machine, the Xhorse Dolphin XP005L is the clear winner. It’s the best choice for locksmiths who value mobility, efficiency, and staying ahead of the competition.

www.vvdishop.com

Xhorse Dolphin XP005 Error 70 Solution

 Problem:

The new Xhorse Dolphin XP005 key cutting machine had error code 70. How to fix it?

Error: 70.
Found available firmware update incomplete.

Solution:

Update firmware.
If failed to update firmware via mobile phone, update it via Xhorse Upgrade kit.
Update firmware to 2.2.8.

How to Solve Xhorse Condor Forget Lock Screen Password?

 What to do if forget the lock screen password for Xhorse Condor Mini Plus/Condor II or Dolphin II key cutting machine?

There are several solutions:

1. The default passwords for the xhorse Condor key cutting machine include 000000, 111111, and 123456. Try them one by one.

 

2. If not working, connect xhorse condor/dolphin with laptop. Run Xhorse Upgrade Kit – recognize the device – “Repair” in the upper-right corner – repair internal errors 1-2 – clear all (step3 for about 3 times) – click “Upgrade” after 3 times of success. Then start key cutting machine.

3. If it is Dolphin XP005L, in Xhorse App, go to Device Info->Start password-> Close password.

If you forget password, uninstall APP then install again.

You can enter password to turn off the key cutting machine password.