The following part displays the step-by-step guide of how to get CONDOR XC-007 key cutting machine‘ motherboard replaced.
Step 1:
Take down the total 6 screws on each side of the head cover (follow the direction of arrow).
Step 1:
Take down the total 6 screws on each side of the head cover (follow the direction of arrow).
NOTE:
Unplug one flat cable and two button cables on the head cover. Pay special attention to the card buckle on the cover.
Step 2: Take down the 8 crows on the back of the machine follow the direction of arrows.
Step 3:
Take down the 4 screws marked arrow above. Draw out the main board together with the fixed mount.
Unplug one flat cable and two button cables on the head cover. Pay special attention to the card buckle on the cover.
Step 2: Take down the 8 crows on the back of the machine follow the direction of arrows.
Step 3:
Take down the 4 screws marked arrow above. Draw out the main board together with the fixed mount.
NOTE:
Please record the connection ways of the connecting lines on the board by taking pictures before draw the main board out.
Please record the connection ways of the connecting lines on the board by taking pictures before draw the main board out.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.