3/27/2022

Xhorse Dolphin XP005L Decode Ford Focus HU101

 Xhorse Dolphin XP005L Key Cutting Machine can decode & cut Ford Focus HU101 successfully. It also supports to cut by code if you have its actual bitting codes. However, now I can use a working key to read out with the machine directly.

 

Decode Key

Vehicle database >> Ford >> Focus >> USA – Gen3(After 2011)

 

It tells to use M5 clamp side A.

Install the working key and tip align 5th position.

 

OK >> Decode key

Dolphin 2 starts decoding the key…

Once decoding is completed, XP005L screen will display the bitting codes: 2442321355.

Xhorse Dolphin XP005L Decode & Cut Ford Focus HU101 1

Xhorse Dolphin XP005L Decode & Cut Ford Focus HU101 2

Xhorse Dolphin XP005L Decode & Cut Ford Focus HU101 3

Xhorse Dolphin XP005L Decode & Cut Ford Focus HU101 4

Xhorse Dolphin XP005L Decode & Cut Ford Focus HU101 5

Cut Key

Remove the working key to install a blank key for ready.

Press “Cut key >> Cut” to start.

It’s allowed to check preview here as well.

 

Xhorse Dolphin ii machine will start cutting when instructed.

Just wait then turn over to cut the other side.

 

All done!

As you can see, it’s same as the original one.

Xhorse Dolphin XP005L Decode & Cut Ford Focus HU101 6

Xhorse Dolphin XP005L Decode & Cut Ford Focus HU101 7

Xhorse Dolphin XP005L Decode & Cut Ford Focus HU101 8

Xhorse Dolphin XP005L Decode & Cut Ford Focus HU101 9

Cut By Code path:

Cut by code >> HU101 >> HU101, 10cuts >> OK >> Input codes >> Cut key >> Cut

 

So far, I like it, Dolphin XP005L is a pretty nice machine. The cut came out really clean and precise.

www.vvdishop.com

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.