4/06/2023

Cut Chrysler CY24 Key with Xhorse Dolphin XP005L

 If you have a problem cutting Chrysler CY24 key with Xhorse Dolphin XP005L key cutting machine, here’s tip.

Cut Chrysler CY24 Key with Xhorse Dolphin XP005L

Put the key in as far as you can and the machine will cut it. We do it on mine all the time.

never had to grind anything.
cy24 is probably the most common key to cut, never once had an issue with it not being far enough.
You have to ignore the instructions on the Dolphin II for the M5 clamp to cut it. You can’t line it up to the line it says.

Cut dozens of them no issues with dolphin 2 and m5 clamp. I’ve cut at least 20 of these no problem.You can also use the universal setting, tip align as far in as the key will sit on side A of the clamp.

 

Never has an issue with dolphin I with M1 clamp position neither.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.