Dolphin XP005 Cut Volvo S40 HU56 AKL by Code

 Hey everyone, today I got a door lock from a 2000 Volvo S40, so I’m gonna use the Xhorse Dolphin XP005 machine to cut a HU56 key for it.

 

I did decode it to get the bitting codes:21324343, and its lock code is DH0800.

 

I will use the Xhorse Key Tool Max to control it, you can also use Xhorse app on a smart phone instead.

 

Connect it with Dolphin XP-005 to start:

All key lost >> Volvo >> Input lock code: DH0800

 

Install M2-A clamp, and fix HU56 key blank as prompts, press “OK”.

 

Just to verify the bitting codes are all right, press

Cutting key >> Continue

Xhorse Dolphin will start cutting automatically…

 

Wait until the machine stopped, take out the key to cut the other side.

Go back to press on Key Tool Max,

Cutting key >> Continue

 

Dolphin XP005 will go on cutting…

 

Take out the key when machine was completed, it can open the lock flawless!

 

Done!

 

This is using Dolphin XP005 Key Cutting Machine to cut a HU56 door lock key for 2000 Volvo S40 all key lost successfully!

https://www.vvdishop.com/

Xhorse Condor Mini Cut Sprinter W906 2007-2011 Key

 This is a demonstration of how to copy a Mercedes Benz Sprinter W906 2007-2011 Key by Xhorse Condor XC-Mini Plus key cutting machine.

 

Prepare a Mercedes original key & a blank key.

 

Go to Condor XC-Mini Plus touch screen,

Key duplication >> Mercedes >> Sprinter >> W906(2007-2011)

Select key type:

Key ID: 15011

Key Width: 550

Cute: 10

Cut Depth: 1.00mm

 

Confirm >> Key decode

Fix the original key flat on M2 clamp, press “Confirm” to start.

 

The Condor Mini Plus starts decoding…

Take out the original key and change to blank key instead when XC-Mini stopped.

 

Press “Cut” on screen.

 

XC-Mini machine starts cutting…

 

Wait until the machine finished.

Done!

 

Take out the new key to have a try, it is actually same as original one, it does work!

 

Mercedes Sprinter W906 key duplication cutting via Xhorse Condor XC-Mini Automatic Machine successfully!

Xhorse Dolphin XP005 Cut a HU92 BMW Key

 Today I’m gonna show you guys how to use Xhorse Dolphin XP005 key cutting Machine to cut a HU92 BMW key. It is worked for a 2002 3 series BMW lock.

 

Here I had got the bitting codes: 11124344

I’ll use the Xhorse Key Tool Max to control the Dolphin XP005 machine.

 

Cut by bitting >> HU92R (depth 1.25mm)

It tells to use M2-2 clamp and tip align 2 position.

Fix the blank key on clamp flatly according to notes.

Go back to Key Tool Max,

OK >> Input the depth keyboard: 11124344 >> Cutting key >> Continue

 

Dolphin XP005 starts cutting key…

First side cutting finished, clean the scraps and flip it over.

 

Let’s start the other side cutting.

Repeat same operations as before:

OK >> Cutting key >> Continue

 

Dolphin XP-005 starts cutting key again…

Cutting key completed!

Clean the scraps and take out the key. It does perfectly open the lock.

HU92 BMW key cutting via Xhorse Dolphin key cutting machine auto machine successful!

http://blog.vvdishop.com/xhorse-dolphin-xp005-cut-a-hu92-bmw-key/

How to Calibrate Xhorse Condor XC-Mini Plus?

 How to calibrate Xhorse Condor XC-Mini Plus automatic key cutting machine? This post is going to show the procedure in details.

 

Power on Condor XC-Mini Plus, press “Self Test” on main menu.

 

Step 1. Height Level Adjustment

To start this process, make sure the cutter is lower than the probe. Press “Height Level Adjustment”.

 

Reminder:

1. Install and tighten Clamp M1. there is no need to put any key on the clamp.
2. Cutter lever needs to be adjusted every time after changing the probe and the cutter.
3. Then length of the A position should be less than 2cm.
4. After the fixed installation of the probe and the cutter, then end tip of the probe needs to be lower than the cutter’s(see ex.I).
5. Must use the original probe.

Press “Continue”, the cutter on XC-Mini Plus starts touching the clamp, you should lower the probe to be same height level. Press “Continue” again.

 

It will ask what type of cutter you’re using on Condor Mini Plus screen, today we are taking 2.5mm as example, so select “2.5mm”, then press “Confirm”.

Step 2. Clamp Calibration

Press “Clamp Calibration”, select the clamp type you’re using: M1/M2. Today we are using an M1 clamp, so select M1.

Reminder:

1. before using this function, please confirm that “Height Level Adjustment of Cutter” is completed.
2. Put a Hon66 blank key in the middle position of the clamp, then tighten the clamp.

 

Press “Continue”, XC-Mini Plus starts calibrating…

 

Calibrate OK, press “Confirm” to return.

Step 3. Cutting Calibration

Return back to upper level, press “Cutting Calibration”.

Reminder:

1. This function can cut a blank key, mainly for calibration.
2. Before accessing this function, please confirm that the “Height Level Adjustment of Cutter” is completed.
3. Install and fasten clamp M1.
4. Clamp a blank key Hon66 on the Clamp M1, then line the key up with the first location jaw, and fasten.

 

Press “Continue”, Xhorse condor starts cutting…

 

Completed!

You are now set to use the Condor XC-Mini Plus key cutting machine.

https://www.vvdishop.com/service/xhorse-condor-xc-mini-plus-calibration.html

How to Cut Ford Ranger H50 Key with Dolphin XP005?

 Hey guys, today I’m gonna to cut a H50 key for Ford Ranger door cylinder, I will use the Xhorse Dolphin XP005 key cutting machine and VVDI Key Tool Max to finish it. Surely you can use a smart phone with Xhorse app installed to instead of VVDI Key Tool Max.

 

This is lock number 51441, H50 is the 5-cut door lock blank key.

Connect VVDI Key Tool Max with Dolphin XP005 machine, let’s go ahead:

Cut by bitting >> Slica – FO14

 

Read the notes, press “OK”.

M1 clamp tip align 3 position, this type recommend use 1.5mm to cut.

Key fixed: clear metal fillings and use your finger to press the blank key on the clamp and make sure it is flat.

Input the lock number for key bitting: 51441.

 

Install the blank key flat and fixed on M1 clamp, tip align 3 position.

 

Go back to VVDI Key Tool Max:

Cutting key >> Continue

Dolphin XP005 machine starts cutting key…

 

Key cutting completed.

 

Clear the metal fillings, take out the key to have a try, okay, it works perfectly.

Done！

 

This is how to use Dolphin XP005 Key Cutting Machine to do a key for Ford Ranger.

Xhorse Condor