How to Cut Ford Ranger H50 Key with Dolphin XP005?

 Hey guys, today I’m gonna to cut a H50 key for Ford Ranger door cylinder, I will use the Xhorse Dolphin XP005 key cutting machine and VVDI Key Tool Max to finish it. Surely you can use a smart phone with Xhorse app installed to instead of VVDI Key Tool Max.

 

This is lock number 51441, H50 is the 5-cut door lock blank key.

Connect VVDI Key Tool Max with Dolphin XP005 machine, let’s go ahead:

Cut by bitting >> Slica – FO14

 

Read the notes, press “OK”.

M1 clamp tip align 3 position, this type recommend use 1.5mm to cut.

Key fixed: clear metal fillings and use your finger to press the blank key on the clamp and make sure it is flat.

Input the lock number for key bitting: 51441.

 

Install the blank key flat and fixed on M1 clamp, tip align 3 position.

 

Go back to VVDI Key Tool Max:

Cutting key >> Continue

Dolphin XP005 machine starts cutting key…

 

Key cutting completed.

 

Clear the metal fillings, take out the key to have a try, okay, it works perfectly.

Done！

 

This is how to use Dolphin XP005 Key Cutting Machine to do a key for Ford Ranger.

Xhorse Condor