Xhorse Dolphin II No Aluminium Key Option Solution

 Question:

Where is the option for aluminium key in Xhorse dolphin xp005l I can’t find it having to use old dolphin XP005.

Answer:

You have to use the M2 clamp.
There is no such an option for the M5 clamp. The Plastic key/aluminium key function was removed.

Xhorse engineer solution:

For keys made of normal conductive materials, place them directly for cutting. For keys made of non-conductive materials, place the keys normally at the beginning of cutting. When the milling cutter starts to rotate, click Pause. After changing the key, click Continue Cutting.

 

1. Mount blank metal and machine to do a detection test.
2. After detection finishes, simple click PAUSE, swap blade.
3. Click RESUME, this is just 1 step before the spindle start, so no more blank key detection.

 

Customer simple solution.
Take a metal version key blank and I use the should stopper against the back edge of the clamp, so when u put the key blank in the clamp the tip of the key hits the shoulder stopper ur holding fast up against the clamp.
Then let the machine “located” the key. then as soon as it turns the motor on hit pause.
Then take the metal blank out and swap it with the aluminum blank. again using the shoulder stop to stop the tip of the key.
Then hit continue.
Some people do this for JLR hu101 keys

It works fork plastic keys (HU66) too.

www.vvdishop.com