Having been decode the HU66 bitting codes, today I wanna to use Xhorse Dolphin XP005 & VVDI2 to make 2 keys for Audi TT 1999 when all key lost.
Dolphin XP005 Cut Keys
Connect with XP005 machine in Xhorse app, press
Cut by bitting >> HU66 >> OK
Install M2-C clamp, fix one key blank flat on it.
Input key bitting codes, press
Cutting key >> Continue
Xhorse Dolphin machine stats cutting…
Repeat same operation for 2 key blanks, wait until finishing.
Install keys with a remote shell , let’s go to next step.
Xhorse VVDI2 Program Keys
Open VVDI2 software, click
Special Function >> K-Line Instrument /Immobox
Select type: Instrument Cluster – Magneti Mareli – Direct 2000-
Click “Read EEPROM”.
Start transfer/receive data…
Data was read out.
Magneti Marelli (without verify). KM start at address: 009C
The kilometers are right, so the PIN is 09551.
Go to “Key learn”.
Select vehicle: VAG KWP1281 Immobilizer – KWP1281
Input Key Count and Login(PIN), click “Learn”.
Please switch ignition OFF for 5s, then switch to ON. Click “OK”.
Test real value to channel…
Switch off ignition. Insert every key to ignition and switch on at least 2s. Click “OK”.
Completed!
Let me test the keys finally, alright, both can work well.
Key programming has done!
This is using Dolphin XP005 key cutting machine + VVDI2 programmer to make 2 keys for Audi TT 1999 all key lost successfully!
http://blog.vvdishop.com/xhorse-dolphin-xp005-vvdi2-make-audi-tt-hu66-keys-all-key-lost/
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.