5/28/2024

How to Cut Dimple Keys by Xhorse Condor XC-002 Pro?

 The upgraded version Xhorse Condor XC-002 Pro manual key cutting will duplicate dimple, double sided, single sided, 4 track external, 2 track external, 4 track internal, channel track keys. Here we will show how to cut a dimple key with condor xc-002 pro.

Cut Dimple Keys by Xhorse Condor XC-002 Pro 1

1. Insert the internal dimple probe and cutters

Cut Dimple Keys by Xhorse Condor XC-002 Pro 2
2. Insert the original key and the blank key using a shim

Cut Dimple Keys by Xhorse Condor XC-002 Pro 3

Cut Dimple Keys by Xhorse Condor XC-002 Pro 4
3. Rotate the knob to standard mode

Cut Dimple Keys by Xhorse Condor XC-002 Pro 5
4. Calibration. Follow the direction of the light until the middle light turns green

Cut Dimple Keys by Xhorse Condor XC-002 Pro 6

Make sure the clamp is in the corresponding position.

Cut Dimple Keys by Xhorse Condor XC-002 Pro 7
Turn on the cutter switch.

 

5. Duplicate the key
Press down the main handle to duplicate the key.

Cut Dimple Keys by Xhorse Condor XC-002 Pro 8

Cut Dimple Keys by Xhorse Condor XC-002 Pro 9

Cut Dimple Keys by Xhorse Condor XC-002 Pro 10

Turn off the switch after finishing one side cutting.
Clip the key and continue to cut the other side.

After finishing cutting the other side, turn off the switch and clean up.

Cut Dimple Keys by Xhorse Condor XC-002 Pro 11
6. Insert the dimple probe and cutter (external) to Xhorse Condor XC 002 pro.

Replace the internal dimple probe and cutter with external ones.

Cut Dimple Keys by Xhorse Condor XC-002 Pro 12

Cut Dimple Keys by Xhorse Condor XC-002 Pro 13

7. Switch the konb to dimple mode

Cut Dimple Keys by Xhorse Condor XC-002 Pro 14

8. Insert the keys
9. Finish the calibration.
Clamp the keys and finish calibration.

Cut Dimple Keys by Xhorse Condor XC-002 Pro 15
10. Duplicate the key
Turn on the cutter switch to cut key.
After finishing one side, turn off the switch.

Cut Dimple Keys by Xhorse Condor XC-002 Pro 16

Clip the key and continue to cut the other side.

Cut Dimple Keys by Xhorse Condor XC-002 Pro 17

After finishing cutting the other side, turn off the switch and clean up.

Now we have a working dimple key.

Cut Dimple Keys by Xhorse Condor XC-002 Pro 18

www.vvdishop.com

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.